| |
On my request for questions in the first part of this course, I got the following
response from Frederik Boelens:
- How is it possible to make nice strings with FM voices? I used AM voices so far, but the volume is not adjustable with AM voices in a nice way.
- How is it possible to keep the music interesting from the start to the end? I used to do a style change, but is it possible to continue with the same style?
Answer 1
Whatever people say about strings: what you mean are pads. Strings
can be divided in first violins, second violins, violas, celli and double
basses. As we use the synthetic FM model, we are talking about pads. In the 80’s
people used the old analogue synths — JP-8, Juno 106 etc. — to replace real
strings, because the band’s budget usually was not enough to hire 30 real
string players, paying $500 per player per day. From that moment, the average
synth owner sees the string pad to be real strings, but that is just
side-information. We can split your question into two parts, pads for FM-PAC or
pads for Music-Module. A nice simple solution for the Music-Module would be by
just selecting four ‘strings’, use three channels to build the chord and use the
fourth channel to detune the top-line of the chord. A detune value of +1 is
good. You could of course also fatten-up all three channels with a detune, but
this way you are spending six of nine channels for the chord alone! So you have
four channels, do not set them too loud compared to the rest of the channels.
Make sure the voice has vibrato of its own and in the patterns also use vibrato,
called modulation in Moonblaster. These vibratos — MOD — should not
be at the same row. See the examples:
example with detune
vol | 52 | 52 | 52 | 52 |
det | +1 | +0 | +0 | +0 |
1 | D 5 | D 5 |
C 5 | G 4 |
2 | . | . | . | MOD |
3 | . | . | MOD | . |
4 | . | MOD | . | . |
5 | MOD | . | . | . |
|
|
example detune and echo
vol | 48 | 52 | 52 | 52 |
det | +1 | +0 | +0 | +0 |
1 | . | D 5 |
C 5 | G 4 |
2 | . | . | . | MOD |
3 | D 5 | . | MOD | . |
4 | . | MOD | . | . |
5 | MOD | . | . | . |
|
|
Your pad-instrument should have the following properties:
- vibrato
- bright sound
- no attack on the modulator
- no attack on the carrier
- longest release on the release of the modulator
- average-long release on the carrier
- no decays on the modulator as well as the carrier: sustain to the max!
- a 1:1 FM-ratio is generally good
Set the modulation-depth in the pattern-editor to 3. Most Muzax 3 tunes were made by using this scheme!
FM-PAC 6 channel mode
It is another story for the FM-PAC using drum mode. Because you have only six
channels, wasting four channels for the chord alone is a bit overcooked. It
depends on the situation actually: if your idea was to use one bass, one melody
and one echo for the melody, then there are three channels left for chords. You
could spend three channels for pads, but then without a detuned channel. And
again, not too loud: volume 10, 11 or 12. You could also use two channels, so
you have a channel left for a detune and write your melody in a way it fills-up
your chord too. We are lucky to have an FM-PAC, which sounds a little fatter
than the Music-Module, so using only two channels with the hardware-violin does a nice job here also!
Xak 3 has nice string-simulations used for melody. A nice trick is the
following. Your melody consists of two hardware violins, detuned respectively as
+1 and -1 and with volume 13 and 12. Make your melody use both channels. Now the
trick: when you want a musical note-off, put a SUS command on the
loudest channel. The quieter channel continues and makes a reverb effect. Since
the Music Module does not support the SUS command, make sure that the
Music-Module-instrument has an amount of release in the
— carrier —envelope. For FM-PAC you have four channels left for your
usual stuff. If you use this method, make sure the rest of your
channels are ‘filled-up’ pretty well. In case of a solo, better use conventional echo channels instead. An easy way of filling-up your sound, for use with the method above, is by using a harpsichord somewhere.
Answer 2
To make an interesting piece of music of about three minutes is a true puzzle on
MSX. Again I am basically talking about sound design, almost boring by now, but
sound design is a major basic skill! Sounds on MSX, whether they come from
FM-PAC or Music Module, only have little ‘evolution’ when speaking of
sound-colour. Avoid long notes without sound-evolution, unless you are using
pad-sounds to make chords. A clear story about melody is a major-sized
article, going to the next issue of MCCW, but until that moment here are some
quick hints:
- keep the melody simple
- let a friend hear your piece once or twice, if that person can whistle the melody afterwards your melody is good. If that person does not know anymore there’s something wrong.
- you can re-use pieces of your basic melody for new themes. The advantage of this is that you already know your melody, this makes your music easy to pick up for others too.
- repeat something = recognise something = structure!
- pay attention to the rhythmic structure! People pick up rhythmic
structures more easily than a bunch of different pitches, for an example see the
end of this article! Maybe you could listen to Celtic music sometime... a simple
rhythmic structure and interesting themes.
- lower the melody an octave, change instrument, and lower the volume. Now make a new melody to this as theme. This method is a part of a technique called counterpoint, a nice subject for a future article.
Fool people with sound design!
As you noticed, I keep repeating the words ‘sound design’... designing a sound.
What is an instrument actually? Here are some elements. A sound contains:
- pitch
- volume
- sound-colour
- location (when used in an ensemble)
- play techniques
The pitch of an acoustic instrument is not exactly constant... there is always a difference. A lot of instruments have their own out-of-tune level, however, you do not hear this in a full orchestra. When you simulate such an instrument with a synth-model — such as FM — keep this out-of-tune level in mind. A thriller on an oboe rarely — actually never — sounds correct, compared with a thriller you use from a synth. This makes real instruments sound real and a synth sound static.
Volume is important also. Volume — music-technology freaks call it
amplitude — when using an FM-model and when used in our trackers, has little
to do with real acoustic volume. Our FM volume is rather an amplifier setting instead,
since low volumes sound about the same as loud volumes. Acoustic
instruments do sound differently when played soft or loud. A crescendo is more
than only the volume getting louder, the whole sound-colour evolves too!
Sound-colour is one of the most important elements of an instrument definition.
It is the sound-colour you recognise of an instrument, and to start with the good
news here, FM is rich of colours, very rich! Even the simplest FM
— simple-FM — has a rich amount of colours. When using complex FM — two
operator FM with feedback or three or more operator FM — you get a lot more colours.
Some instruments can be simulated surprisingly well with FM. Unfortunately, real
instruments have small fluctuations in the colour-spectrum, so that a 100% simulation with our FM will not work.
Location is not really an issue on MSX, perhaps on OPL4... when I get questions
about this I will come back to it some day...
Play techniques are as important as sound-colour. If a sound is produced 100%
perfectly, you can still ruin your result if your play technique fails. A
well-known example is the guitar. When you analyse what you hear then you will
notice that you will hear a lot of noise and ‘mistakes’, like fret noise, nails that
hit the strings etc. If you make perfect guitar-string samples, and you do not
sample all those mistakes too, you can imagine that the result is bad. If you
try to simulate a wind instrument such as an oboe or bassoon, you
can get nice results as long as you take care of all the play
techniques/effects those instruments have. All these aspects belong to the
profession of a sound designer. A piano like that of the OPL4, not really bad,
fails in a tracker notation like that of Moonblaster. Basically because you
cannot adjust the volume on the same step as the note. You do have to pay
attention to get the piano sound like a real piano; if you have to use eight
channels for this... then you have to.
The 80’s
The DX7 was the major success of the 80’s. Every band of some proportion owned a
DX7. In those years, synths did not have built-in effect processors. And the
effect processors in fact do a major job on FM, especially when using chorus and
reverb. For instance, make an instrument and try to route the output through an
effect machine! Or sample the instrument into your pc and use software like
Soundforge or Cooledit to add some reverb. You will be surprised about the result
because suddenly all instruments sound cool and fat. And suddenly you will
recognise all those sounds you heard in the 80’s, indeed that was FM too! It is
pretty strange it sounds that cool, a piano with reverb sounds ‘normal’ but the
same reverb added to an FM voice is very special and new. Probably this is
because you never heard your FM-PAC sound like this in all those years... it is
strange to hear it like this. FM in fact is a cool synthesis model... be proud
of it! It is an excellent fundamental for your carrier as soundaholic. Whatever people say: remember that FM is cool!
Finally
I promised an experiment! You can do this alone, but together it is more fun! I
was talking about the fact that people recognise a rhythmic structure a lot
easier than a melodic structure. Do the following: clap you hands twice and let
another person clap the third one. You will notice that the timing is correct. The
time between the first two claps is obviously that clear that anyone can define
when the next clap should come. This can be very fast, but also very slow, the
experiment will show how slow it can be. Slower than you think! Next time a theoretic article about analysis.
Questions? E-mail them to support these articles!
A short note from the editors:
Of course there is no need to e-mail anymore, because the articles will not be continued.
|